Quality:
Competence:
Quality & competence:
Pressure Fire Hose, type (T) with valves
Pressure fire hose is used on mobile fire-fighting equipment to deliver fire-fighting substances (water and water/foam mixture) for a distance under pressur. It can withstand even excessive pressure.
Complies with SOLAS requirements.
Complies with SOLAS requirements.
Pressure fire hose, type (K) with valves
The pressure fire hose is designed for transporting fire-extinguishing substances and mixtures under excessive pressure to the source of fire.
Complies with SOLAS requirements.
Complies with SOLAS requirements.
Pressure Fire Hose, latex covered with fittings
Pressure Fire Hose with latex covering is supplied in donut roll 20 m (+/- 0,5 m) lenth, tailor-made with fire-fitting or hand fire nozzles, according to the order.
Complies with SOLAS requirements.
Complies with SOLAS requirements.
The sheeting of pressure fire hoses
The sheeting of pressure fire hose is made of capron filament with inner waterproofing layer of flexible polymer, according to DSTU 3810-98 and ТU17.5-30642323-001:2005.
You can buy the following sheeting diameters: 51 mm, 66 mm, 77 mm, 100 mm, 150 mm.
You can buy the following sheeting diameters: 51 mm, 66 mm, 77 mm, 100 mm, 150 mm.
Rigid, Pressure-Suction fire hoses
Rigid, pressure-suction fire hoses are used for quick extraction or for pumping water.
A specialized rubber-fabric material with metal frame spirals inside is used for structural rigidity.
A specialized rubber-fabric material with metal frame spirals inside is used for structural rigidity.
Self-contained breathing apparatus Sigma Type 2
The Sigma 2 Type 2 an open circuit, self-contained, compressed air breathing apparatus is specifically designed as a marine/industrial firefighting SCBA, and is also suitable for providing respiratory protection in IDLH environment.
Self-contained breathing apparatus RHZK 6/30
Approved for use as a self-contained breathing apparatus with compressed air in the gear of firefighters. Protects the respiratory organs, skin, and eyes from exposure to chemicals or poisonous and harmful air.
Emergency escape breathing apparatus ELSA 15B
ELSA 15B is an emergency escape breathing apparatus (EEBD), which is used for rapid escape from hazardous environments, both in industrial premises and marine objects. It is simple and quick in operation and ensures maximum protection. MED approved.
Emergency escape breathing device (EEBD) TH15B
Compressed air emergency escape breathing device (EEBD) TH15B is a self protection breathing device which is used to quickly and safely escape from dangerous fire places and premises engulfed in flames. MED approved.
Emergency escape breathing apparatus Ocenco M-20.2
Emergency escape breathing apparatus Ocenco M-20.2 provides up to 32 minutes of air supply and is used to escape from hazardous environments. The time of compressed oxygen supply depends on activity level of the user. SOLAS/MED, USCG approved.
Cylinder (steel), 6 liter, 300 bar
CYL-1640 is 6 liter cylinder made of steel for 300 bar pressure with nickel plated brass cylinder valve. It is tough and very durable.
Gallet F1 XF Fire Helmet
Gallet F1 XF fire helmet ensures an ultimate thermal protection and maximum air circulation in all operating conditions.
Firefighter's hood
Firefighter's hood provides additional protection in cold and wet weather. Indispensable when working in cold spaces. It is easily removed from the helmet for washing/drying.
3S Full-face helmet mask
Full-face protective mask is used to protect the respiratory system from the ingress of gas, dust, aerosol substances, etc. It can be put on and off without removing your helmet.
Ear defenders and earplugs
Headphones and earplugs meet all the requirements for PPE for hearing organs and have noise prevention up to 115 dB.
Safety glasses
Safety glasses are personal eye protection equipment against solid particles, splashes of various liquids (including aggressive ones), dust, gases (mask-type goggles), as well as infrared, ultraviolet, laser and other types of radiation.
Welding helmets, goggles and face shields
We supply the following personal protective equipment for the welder:
- Welding helmet for eye protection;
- Welding goggles for low intensity and auxiliary work;
- Welding face shield of several types for a higher degree of protection;
Protective clothing for fire-fighters
Protective clothing for fire-fighters protects from high temperature, open fires, heat radiation, water and acids during reconnaissance, resque operations and primarily during firefighting.
You can buy protective clothing of the following categories:
You can buy protective clothing of the following categories:
- I category;
- II category;
- III category;
Fiereman's Safety Boots
Depending on use environment and challenges, the following dielectric and fiereman's safety boots are available:
- Fiereman's safety boots;
- Leather heat resistant boots;
- Dielectric fiereman's safety boots;
Insulated wire cutters
Insulated wire cutters is a hand-held insulating tool designed for cutting cables and wires.
Fireman's Safety Belt
Fireman's safely belt is designed for saving people from fires, as a fall arrestor when working on fire staircases and also for wearing fire hatchet in holster.
Available in three sizes.
Fireman's snap hook
Fireman's snap-hook is intended to act as a fall arrestor when working at heights, for rescuing people and self-rescuing of firefighters from high-level floors. It is supplied in different design styles.
Explosion-proof flashlights
Explosion-proof flashlights are used in explosive environments with flammable gases or combustible dusts. Structural elements do not cause sparks on contact when turning on the lamp.
Fire Axe, waist Belt Type
Fire axe with a holster is designed for breaking down doors, windows, roofs, various light structures of buildings. It also can be used as a hooking tool on steep roof slopes, or when opening fire hydrants.
Fire Axe with elongated handle
Fire Axe with elongated handle (70 or 90 cm) is used for breaking down various constructions and other physically demanding works.
Fireman's Gloves
Fireman's Gloves are designed to protect hands from exposure to open flame, heat flux, water, surfactants, lubricants, and other dangerous and harmful factors.
Safety line
Stainless steel safety line is a rope twisted from high-alloy steel wire, designed to rescue people, self-rescue and acts as a safety harness for firefighters and related emergency rescue operations.
Capron lifeline
Capron lifeline is designed for rescuing people and shifting of cargo during fires and other natural disasters.
Chemical protective suit for firefighters
Non-airtightness-type chemical protective suit HYFH-C1 is used to protect fire fighting personnel from harmful chemicals and corrosive substances in a fire or accident.
